Product center
- Precision ceramic piston pump valve series
- Liquid nitrogen point liquid frozen beads series
- Diagnostic reagent drop package series
- Ceramic plunger pipette pump series
- Micro upgrade ceramic metering pump series
- Millilitre ceramic injection pump series
- Intelligent single head metering pump series
- Intelligent multi-head metering pump series
- Ceramic constant current metering pump series
- Large flow rotary valve metering pump series
- High viscosity material variable pump series
- Stainless steel pressure container series
- Ji kerr computer controller series
- Injection pump valve auxiliary accessories series
Contact us
Dongguan Ji kerr automation Technology Co., LTD
Telephone：0769-83328418
Fax：0769-83328428
Email：dgjikeer@126.com
Address：80 Luxi Road, Xixi Village, Liaobu Town, Dongguan City, Guangdong Province
Millilitre ceramic injection pump series
Home > Product center > Millilitre ceramic injection pump series
Product center > Millilitre ceramic injection pump series
Double head liquid injection pump Type A series
l Compact structure, all stainless-steel parts, small size, high precision, corrosion resistance and high temperature resistance.
l Easy to disassemble and install in only 3 minutes and can be cleaned online by switching the valve to the forward and reverse directions.
l It can be sterilized by negative pressure, high temperature and steam.
l Dual axis stepper motor drive, high performance, long service life, high strength and repeatable operation.
l The precision ceramic valve rotates reciprocally, and the measurement size is adjusted by the stroke length.
l No dynamic seal, no quick-wear parts, zero maintenance and repair costs.
l Anti-chemical reaction prevention is compatible with most fluids.
Telephone：0769-83328418
Message feedbackDetailed introduction
Widely used for:Precise quantity filling of liquids such as biological agents, pharmaceuticals, batteries, CVs, heat pipes, liquid agents, perfumes, etc.
Product performance：
l Compact structure, all stainless-steel parts, small size, high precision, corrosion resistance and high temperature resistance.
l Easy to disassemble and install in only 3 minutes and can be cleaned online by switching the valve to the forward and reverse directions.
l It can be sterilized by negative pressure, high temperature and steam.
l Dual axis stepper motor drive, high performance, long service life, high strength and repeatable operation.
l The precision ceramic valve rotates reciprocally, and the measurement size is adjusted by the stroke length.
l No dynamic seal, no quick-wear parts, zero maintenance and repair costs.
l Anti-chemical reaction prevention is compatible with most fluids.
Technical Parameters
Specification & Model | JKR-STX-A300μl | JKR-STX-A800μl | JKR-STX-A1500μl | JKR-STX-A3000μl | JKR-STX-A6000μl | JKR-STX-A10ml | JKR-STX-A20ml | |
Pump valve material | Alumina/zirconia/ silicon nitride(optional) | |||||||
Pump casing material | SUS304/SUS316/SUS316L(optional) | |||||||
Contact liquid material | Ceramic, SUS316L,PTFE(optional) | |||||||
Driving mode | Dual axis 86 stepper motor | |||||||
Adjustment mode | Gear adjustment | |||||||
Single stroke range | 10-300μL | 20-800μL | 30-1500μL | 50-3000μL | 50-6000μL | 0.5-10mL | 0.5-20mL | |
Stroke accuracy | ±1‰ | ±2‰ | ±4‰ | ±5‰ | ±1℅ | ±2℅ | ±3℅ | |
Stroke speed | 18-180r/min | 18-180r/min | 18-180r/min | 18-180r/min | 18-120r/min | 18-100r/min | 18-100r/min | |
Liquid inlet pipe | Φ4×6mm | Φ4×6mm | Φ6×8mm | Φ6×8mm | Φ6×8mm | Φ6×8mm | Φ8×10mm | |
Outlet pipe | Φ2.5×4mm | Φ2.5×4mm | Φ4×6mm | Φ4×6mm | Φ4×6mm | Φ4×6mm | Φ6×8mm | |
Communication interface | RS232(485 optional), I/O, CC TRIG, AUX OUT | |||||||
Power Supply | 220V/50HZA or 120V/60HZ (optional) | |||||||
Work environment | Use temperature and humidity 5-40℃, below 85%RH | |||||||
Note: The above are only representative products, models not listed include:JKR-STX-A1000μl、JKR-STX-A2000μl.
